ATG Epower Commercial EV Charger, 80 Amp 19.2 kW at 240 VAC

$1,370.20

Wi-Fi & Bluetooth-enabled smart EV charging station (Level 2 EVSE) with 18-foot cable

Key Features

  • Unlock a seamless and trustworthy charging experience with ISO15118 & CTEP certification
  • Experience a user-friendly charging process with the illuminating dynamic LEDlight and a crystal-clear 4.3-inc
  • Intelligently connects the device through WIFI or Bluetooth to remote control or monitor your charger.
  • OCPP 1.6J compatibility with upgradable to OCPP 2.0.1
  • Dynamic load managementMake a payment for charging by scanning the QR code with credit card, or redirect to the mobile app for login and processing
  • Precision measurement of power, energy, voltage & current.
  • Dynamic LED lights display Wi-Fi connectivity and charging behavior
  • IK10 impaction resistant rating and tamper proof screws.
  • Weatherproof, dust-tight, polycarbonate casing
  • 5-Year warranty

Specifications

 

Electrical Characteristics Safety Rated: 32A Max
  • Single phase input: nominal voltage 208- 240 VAC~ 60 Hz
  • Power: 7.6 kW at 240 VAC

Safety Rated: 40A Max

  • Single phase input: nominal voltage 208- 240 VAC~ 60 Hz
  • Power: 9.6 kW at 240 VAC

Safety Rated: 48A Max

  • Single phase input: nominal voltage 208- 240 VAC~ 60 Hz
  • Power: 11.5 kW at 240 VAC

Safety Rated: 80A Max

  • Single phase input: nominal voltage 208- 240 VAC~ 60 Hz
  • Power: 19.2 kW at 240 VAC
Input Cable Hardwire required
Output Cable & Connector
  • 18ft/5.5m cable (25ft/7.5m optional)
  • Type 1 SAE J1772 standard compliant/ NACS standard compliant
APP
  • Precision measurement of power, energy, voltage & current
  • Automated notifications: time-of-use in effect, start of charge, end of charge, unit offline, unit back online, car not plugged in by a set time
Smart Grid Connectivity Built-in Wi-Fi (Optional) (802.11 b/g/n/2.4GHz) / Bluetooth Connectivity
Firmware Over-the-air (OTA) upgradeable firmware
Emissions Reduction Available via optional software upgrade
Enclosure
  • Dynamic LED lights show charging status: standby, charging in progress, fault indicator, network connectivity
  • NEMA Enclosure Type4: Weatherproof, dust-tight
  • 4.3″ LCD Screen
  • Vandal-Proof: IK10 impaction resistant rating and tamper proof screws
  • Quick-release wall mounting bracket included
  • Operating Temperature: -22°F to 122°F (-30°C to 50°C)
Dimensions Main enclosure: 12.8in x 9.7in x 3.8in (326mm x 247mm x 97mm)
Codes & Standards NEC625, UL817, UL991, UL2231, UL2251, UL2594, OCPP1.6J, ISO15118, CTEP
Safety ETL Listed, Energy Star, FCC Certify
RFID Support
Energy Management System Support
Warranty 5 years limited warranty

Resources & Downloads

48Amp Commercial EV Charger: Specification

Q&A

Q:

What’s the hardwired?
A:
Hardwired units come with a standard input whip, which requires a professional electrician to permanently connect the ATG-C01 to an electrical system.

Q:

Where can I find the installation guide and setup instructions for Wi-Fi and the app?
A:
You can find the complete online manual here, which includes installation and Wi-Fi setup instructions.

Q:

Will ATG-C01 commercial stations work in rain and snow?
A:
Yes, ATG-C01 commercial stations are ruggedized for indoor and outdoor installation, even in extreme weather conditions. All ATG-C01 commercial stations meet NEMA 4X standards for durability.

Q:

What is smart charging?
A:
A smart charging station is a station that is connected to the Internet and can respond to grid signals. Smart charging allows businesses to optimize charging sessions and participate in utility programs to save electricity and reduce electric bills.

Q:

Is ATG-C01 safety certified?
A:
Yes, ATG-C01 is ETL Listed, which means it adheres to the highest safety standards for electric vehicle supply equipment.

Q:

Is there a warranty?
A:
We also offer a 5-year limited warranty on commercial charging stations. Please note that this warranty is only valid for use under normal commercial operating conditions. Using a commercial box outside of normal commercial operating conditions voids the commercial warranty.

Q:

Is support ISO15118 and CTEP?
A:
Unlock a seamless and trustworthy charging experience with ISO15118 & CTEP certification. Trust in accurate and transparent metering while enjoying hassle-free Plug & Charge convenience

Related Products

Cart Close
Updating…
  • No products in the cart.

Continue shopping